BENEFITS AND FEATURES |
Stripping ▶ No scratches from heated stripping ▶ Stripping time : 1.5sec ▶ Over one million life cycles of the motor ▶ Over 5kg/f Tensile Strength of fiber after stripping | Cleaning ▶ One-touch pump ▶ Easy to refill cleaning alcohol | Cleaving ▶ Single-action cleaving ▶ Fiber chip collector attached | |
Bidirectional Operation System
▶ The monitor(Touch screen) can be viewed bi-directionally for user’s preference.
Resistance to Shock, Dust and Water
▶ The splicer with high reliability has stable performance even in a harsh environment.
l Shock – Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x
Powerful Lithium Polymer Battery with Large Capacity
▶ More than 350 times for full cycling of splicing and sleeving when fully charged.
Auto-Calibration
▶ Detects the temperature, the humidity, the pressure automatically to calibrate the ARC discharge properly.
IPAAS Technology Basis Core Alignment
▶ Swift S5 is the core alignment splicer based on the IPAAS (Image Pattern Analysis Alignment System)
Technology.
Built-in Dual Sleeve Heater
▶ Productivity would be increased up to 30% due to a simple & user-friendly design.
▶ The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector.
Compatible with Fusion Splice-On Connector(SOC) in accordance with the Industrial Standard
l SPECIFICATIONS |
Category | Description | Fiber alignment | IPAAS core to core alignment(Image pattern analysis alignment system) | Applicable type of fibers | SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655) EDFA, EI980, Splicing available with different type fiber(SM/MM), ITU-T G.657 | Fiber count | Single fiber | Applicable fiber dimensions | Cladding diameter: 80 ~ 150㎛, Coating diameter: 100 ~ 1000㎛ | Fiber setting and cleaved length | 250㎛ : 8~16mm, 900㎛ : 16mm(Application Holder: 8mm) | Splicing modes | Splice mode: 100, Heat mode: 50 | Typical Splice Loss | SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB | Return Loss | > 60dB | Splicing Time | Splice: Typical 9sec | Splice loss estimate | Available | Sleeve heating time | 30sec, 90sec(Connector) | Applicable protection sleeve | 40mm, 60mm(fiber), 28mm or 32mm(connector) | Storage of splice result | The last 9,000 results to be stored in the internal memory.(Image 9,000 results) | Tension test | 2N / 4,4N(Option) | Operating condition | Altitude: 3,660m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof | Storage condition | Temperature: -40℃~80℃, Humidity: 0~95% | Dimension | 142(W)x225(L)x132(H)mm(Including rubber) | Weight | 2.5kg(Including battery 3.2kg) | Viewing method and display | Two CMOS cameras and 4.3-inch color LCD monitor with touch screen | Fiber view and magnification | X or Y view: 300X, X and Y view: 300X, 187X (Zoom 700X) | Power supply | DC Lithium polymer battery(DC 14.8V, 8400mAh), 100~240V AC Adapter | No. of splice cycles with battery | 320cycle | Electrode life | More than 3,000 times | Terminals | USB, RCA, External Power(DC 12V Available for car cigar jack) | |
l STANDARD PACKAGE |
Category | Model | Q’ty | Arc Fusion Splicer | S5 | 1 | AC Adapter | S311 | 1 | Sleeve Loader | S312 | 2 | Spare Electrode | EI-21 | 1 pair | Battery Pack | S513 | 1 | Colling Tray | CT-03 | 1 | Holder | HS-X | 1 pair | Tool Box | - | 1 | User Manual | - | 1 | Carrying Case | Hard Case | 1 | l OPTION PACKAGE | Category | Model | Battery Pack | S513 | Cleaver Blade | BI-05 | Fiber Optic Stripper | CFS-2 | Electrode | EI-21 | Fiber Holder | HS-250, HS-900, HS-2.5, HS-IN, HS-SC, HS-FC, HS-LC, HS-ST | Sleeve | S-160(60mm), S-140(40mm) | Sleeving Clamp | SC-01 | SOC Connector | SC, LC, FC, ST (Refer to FTTx Solution catalogue) | External Power | DC 12V Available for car cigar jack | Carrying Case | Soft Case | | |